Lorenzo,
Well the first thing I'm thinking is that your trunk ports on the 2948-G-L3
should not be in a specific bridge group. You might want to look and see
how spanning tree is looking on both devices. Show span on the 2948g-L3 and
show spantree <vlan> on the 2948g. There are several other show commands
that are handy.
How long did you wait after plugging the PC in to the port before pinging?
Spanning tree may not have finished running before you tried to ping. Give
it at least 45 seconds after plugging it in.
The other thing you will probably want to do is integrated routing and
bridging on the 2948-G-L3. This uses the interface BVI.
http://www.cisco.com/univercd/cc/td/doc/product/l3sw/2948g-l3/rel_12_0/7wx51
5a/config_g/bridging.htm#xtocid38394
Jim
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
