Well... So you don't have to type it in several times, I used to think...
But really, the logical way it is set up is creating the access list, and
applying the access group. You could ask this question of any config
command that you think should be applied at an individual interface.
Correct me if I'm wrong. :-)
Jim
-----Original Message-----
From: nandit [mailto:[EMAIL PROTECTED]]
Sent: Friday, July 21, 2000 8:07 AM
To: [EMAIL PROTECTED]
Subject: Access lists
Hi group,
Why is there a access list and a access group command when we need to
specify an access list to an interface.why do we key in access list in the
config mode and access group in the interface config mode?
Please clarify
Bye
nandit
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
