Check out "Easy IP" on the cisco website.
to enable dynamic address assignment on your dialer interface put in:
ip address negociated
If you config the Dialer int as "ip nat outside" and your ethernet
(presumably) as "ip nat inside" you shouldn't have any trouble
hth
Andy
----- Original Message -----
From: Kobbervig, David <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, August 16, 2000 8:49 PM
Subject: DDR Dialer0
> Is it possible to have the dialer0 be assigned a dynamic address or does
it
> have to be assigned a static address or be ip unnumbered?
>
> I don't have a static IP address from my ISP, and IP unnumbered won't work
> because I am using 198.162.x.x internally. I am trying to configure my
3104
> ISDN interface to dial my ISP. Additionally, will I run into issues with
> NAT? Has anybody ever done this? What were your experiences?
>
> Thanks!
>
> Dave
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
