RE: Performance prob with Router-Router IPSEC tunnel..

[Cisco Group]

The router model is 2621 on both sides with IOS version 11.3 and there is
only one tunnel configured..  The average CPU utilization is around 41%.. 

-----Original Message-----
From: Chuck Larrieu [mailto:[EMAIL PROTECTED]]
Sent: Thursday, August 17, 2000 10:14 PM
To: Cisco Group; [EMAIL PROTECTED]
Subject: RE: Performance prob with Router-Router IPSEC tunnel..


what is the router involved? model numbers, RAM, IOS version?
 
have you checked CPU usage? single or multiple tunnels?
 
Chuck

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Cisco
Group
Sent: Thursday, August 17, 2000 9:26 AM
To: [EMAIL PROTECTED]
Subject: Perfomance prob with Router-Router IPSEC tunnel..


Hi Guyz,
 
We are having a cisco router-router IPSEC tunnel between two
locations(Intranet VPN) over an internal leased line.The performance is very
poor even though the link is only 40% utilised. On examining we found that
the tunnel bandwidth is only 9k..Is there anyway I can increase the tunnel
bandwidth or can i have an IPSEC connection without using a tunnel so that i
can use more bandwidth in the link.. There is a bandwidth command in the
interface mode but it is only for calculation of cost and it has no impact
on the actual tunnel bandwidth
 
Can anyone pls help me out with this...Thanx in advance..
 
Regards,
Nandu



This e-mail and any files transmitted with it are for the sole use of the intended 
recipient(s) and may contain confidential and privileged information.
If you are not the intended recipient, please contact the sender by reply e-mail and 
destroy all copies of the original message. 
Any unauthorised review, use, disclosure, dissemination, forwarding, printing or 
copying of this email or any action taken in reliance on this e-mail is strictly 
prohibited and may be unlawful.

                Visit us at http://www.cognizant.com

The router model is 2621 on both sides with IOS version 11.3 and there is only one tunnel configured..  The average CPU utilization is around 41%.. 

-----Original Message-----
From: Chuck Larrieu [mailto:[EMAIL PROTECTED]]
Sent: Thursday, August 17, 2000 10:14 PM
To: Cisco Group; [EMAIL PROTECTED]
Subject: RE: Performance prob with Router-Router IPSEC tunnel..

what is the router involved? model numbers, RAM, IOS version?

 

have you checked CPU usage? single or multiple tunnels?

 

Chuck

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Cisco Group
Sent: Thursday, August 17, 2000 9:26 AM
To: [EMAIL PROTECTED]
Subject: Perfomance prob with Router-Router IPSEC tunnel..

Hi Guyz,

 

We are having a cisco router-router IPSEC tunnel between two locations(Intranet VPN) over an internal leased line.The performance is very poor even though the link is only 40% utilised. On examining we found that the tunnel bandwidth is only 9k..Is there anyway I can increase the tunnel bandwidth or can i have an IPSEC connection without using a tunnel so that i can use more bandwidth in the link.. There is a bandwidth command in the interface mode but it is only for calculation of cost and it has no impact on the actual tunnel bandwidth

 

Can anyone pls help me out with this...Thanx in advance..

 

Regards,

Nandu