Also check the AIM daughter card is seated correctly, also DRAM chips are seated correctly as these can cause SEGV violation errors. "Ron Stark" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I apologize to the group for this ugly, ugly post! I was in a real hurry to > figure out a frame-relay issue and a compression module issue. I was taking down > some notes so I could see if anyone had experienced the problems I was > having/still having and instead of hitting save as a draft I hit send...so many > thanks for not flaming me too bad. > Ron > > > > > "Ron Stark" <[EMAIL PROTECTED]> on 08/18/2000 10:52:47 AM > > Please respond to "Ron Stark" <[EMAIL PROTECTED]> > > To: [EMAIL PROTECTED] > cc: (bcc: Ron Stark/SanDiego/Cymer) > Subject: 2621 Router crash with compresstion module on > > > > Anyone seen this? > 2621 IOS 12.0(7)T, 64K frame-relay S0/0.1- 1st packet through the AIM module > will crash the router. error = System reurned to ROM by error - a SegV exception > PC 0x816BC738 > > Thanks Ron > > > ___________________________________ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > > > > ___________________________________ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > --- ___________________________________ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
