Hi ,
I am facing a problem with my 2501 router. It was working fine, but for
the last few days I am not able to connect to the console port of the
router. It shows nothing on the screen when I try to connect and press
enter. When I checked the Signal level of the console port on my Break Out
box, it showed me the continuous LOW status of TxD signal. When I reboot the
router, it shows me the startup messages and finally after showing all those
messages it hangs and TAKES NO INPUT from the HYPER TERMINAL. I have also
tried many terminal Software like Telix, Teraterm.
The router has no prior configurations (as I did an ERASE STARTUP
CONFIGURATION before), so I am not able to connect via TELNET or AUX port.
Is there any way out???
Can I replace NVRAM of this router with any other NVRAM having configuration
and then connect with the router with AUX port or via TELNET?
Is NVRAM Of 2501 router replaceable?
Khurrum
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
