connect a rolled cable from COM port of linux box and the other end connect
to the console port of cisco router
>From the Linux prompt type
minicom
It will lead u to the router prompt
dear all, am I right
Sim
-----Original Message-----
From: Mike Baker [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, August 23, 2000 2:42 PM
To: [EMAIL PROTECTED]
Subject: Linux Terminal to a Cisco Router
Hey all,
I want to set up a linux box to talk to a Cisco router over a rolled cable
connected to a serial port. I want to redirect the terminal so that I can
see the router prompts etc.
Has anyone done this before? If so can you let me know how I would do it.
Thanks in Advance.
Mike
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
==================================================================
De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
de afzender direct te informeren door het bericht te retourneren.
==================================================================
The information contained in this message may be confidential
and is intended to be exclusively for the addressee. Should you
receive this message unintentionally, please do not use the contents
herein and notify the sender immediately by return e-mail.
==================================================================
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
