What problem are you trying to solve?
The short , by default, answer is that you can't: basically, you need to
view the configuration, something that is normally reserved for enable mode.
I am assuming that you do not want to use the various show ip ospf commands
to reverse engineer what interfaces are participating in the OSPF process,
and in what area.
HOWEVER....
you can put the following commands in your configuration, and they will
enable you to view the configuration from user mode.
privilege exec level 1 show startup-config
privilege exec level 1 show
(You can also enter a similar command to view the running configuration).
Security Breach! Danger! Danger! Chuck Larrieu!
Be warned that this gives your user the ability to view your
configuration... including your enable password (use enable secret),
passwords on your vty's, etc. In other words, they can see everything! I
personally would not do this on a production network...ever! But since you
asked...
HTH,
Charles
""Sim, CT (Chee Tong)"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Dear all,
>
> Is there a command to view the OSPF entry in the USER MODE?? For example
as
> shown
>
> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
> router ospf 100
> redistribute static
> network 57.198.47.0 0.0.0.255 area 57.198.47.0
> network 57.192.243.48 0.0.0.3 area 57.198.47.0
>
> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
>
> How to get the "network 57.198.47.0 0.0.0.255 area 57.198.47.0"
> and the "network 57.192.243.48 0.0.0.3 area 57.198.47.0"
> from the USER mode
>
> Router>
>
>
> Chee Tong
>
>
> ==================================================================
> De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
> is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
> onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
> de afzender direct te informeren door het bericht te retourneren.
> ==================================================================
> The information contained in this message may be confidential
> and is intended to be exclusively for the addressee. Should you
> receive this message unintentionally, please do not use the contents
> herein and notify the sender immediately by return e-mail.
>
>
> ==================================================================
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ---
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
