I've been searching for information on a problem I have with one of my remote sites. I'm seeing two problems and this document makes me think they might be related. Except my version of the IOS is a little older than what is stated in this document. ( http://cisco.google.com/cisco?client=cisco&q=cache%3Ahttp%3A%2F%2Fwww%2Ecisco%2Ecom%2Fwarp%2Fpublic%2F770%2Ffn285_08101998%2Eshtml+input+queue ) Here is my topology : [router 1]<-----<atm link>--->[router 2] ** Problem 1: The sap table on router 2 seems to have all of the current information. But the saps for the network connected to router 2 is not being propagated to the rest of the internetwork. In other words the rest of the internetwork doesn't know about the ipx devices behind router 2. ** Problem 2: The network on router 2 looses connectivity almost everyday. The time frame is usually anywhere from around 12:00 pm to 4:00 pm. I cannot find any scheduled events on, or to this network. Some of the overall symptoms are : - the input queue 'drops' count is high. - the utilization goes high during the periods of connectivity problems. - router 2's sap table is not propagated to the internetwork. Yet router 2 receives sap table packets just fine. Evidence of this is revealed with the 'show ipx interface' command. Which shows that the 'output' of sap packets are very low compared to the 'input' of sap packets on router 2. i.e., router 2: SAP packets received 184041, SAP packets sent 1 router 1: SAP packets received 338, SAP packets sent 196522 Thanks for any and all suggestions, kelly ___________________________________ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
