The router is probably fast-switching. Which means it is load balancing on
a per-destination basis.
All of your traceroutes are for the same destination, so they are going the
same route.
On the serial interface, if it is T1 or slower, do a "no ip route-cache"
That will turn off fast-switching, and make the router process switch the
packets. It is then supposed to load balance on a per-packet basis instead
of a per-destination.
>
>The admin distance is 120, hop count is 2 for two entries to the same
>network yet when I do a traceroute it only traces through the first entry
>Duck
>----- Original Message -----
>From: Brian <[EMAIL PROTECTED]>
>To: Donald B Johnson Jr <[EMAIL PROTECTED]>
>Cc: Atif Awan <[EMAIL PROTECTED]>; Agnelo D'souza <[EMAIL PROTECTED]>;
><[EMAIL PROTECTED]>
>Sent: Monday, August 28, 2000 8:58 AM
>Subject: Re: load balancing on Rip
>
>
> > On Mon, 28 Aug 2000, Donald B Johnson Jr wrote:
> >
> > > How come when I do a traceroute it only shows that one path is being
>used.
> > > Thanks
> > > Duck
> >
> > show us the route table output,then show us the traceroute.
> >
> > Brian
> >
> >
> > > ----- Original Message -----
> > > From: Brian <[EMAIL PROTECTED]>
> > > To: Donald B Johnson Jr <[EMAIL PROTECTED]>
> > > Cc: Atif Awan <[EMAIL PROTECTED]>; Agnelo D'souza
><[EMAIL PROTECTED]>;
> > > <[EMAIL PROTECTED]>
> > > Sent: Monday, August 28, 2000 8:28 AM
> > > Subject: Re: load balancing on Rip
> > >
> > >
> > > > On Mon, 28 Aug 2000, Donald B Johnson Jr wrote:
> > > >
> > > > > Could You show me the commands to load balance RIP please. I have
>never
> > > seen
> > > > > how to do this
> > > >
> > > > there are no special commands. RIP will load balance accross equal
>cost
> > > > paths. If you have two routes to the same destination and they have
>equal
> > > > hop count, then rip is going to do the balancing.
> > > >
> > > > Brian
> > > >
> > > >
> > > > > Duck
> > > > > ----- Original Message -----
> > > > > From: Atif Awan <[EMAIL PROTECTED]>
> > > > > To: Agnelo D'souza <[EMAIL PROTECTED]>;
><[EMAIL PROTECTED]>
> > > > > Sent: Sunday, August 27, 2000 11:06 PM
> > > > > Subject: RE: load balancing on Rip
> > > > >
> > > > >
> > > > > >
> > > > > > RIP does not support load balancing for unequal cost routes.
> > > > > >
> > > > > > For routes with the same hop count and pointing to the same
> > > > > > destination RIP does load balancing by default and will load
> > > > > > balance upto 4 equal cost routes by default.
> > > > > > However, you can configure it to load balance between six equal
> > > > > > cost routes.
> > > > > >
> > > > > > How the router will load balance depends on the switching
>process
> > > > > configured
> > > > > > on the router. For process switching the router will do per
>packet
> > > > > > load balancing and for fast switching the router will perform
>load
> > > > > balancing
> > > > > > per destination.
> > > > > >
> > > > > > -----Original Message-----
> > > > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
>Behalf Of
> > > > > > Agnelo D'souza
> > > > > > Sent: Monday, August 28, 2000 10:47 AM
> > > > > > To: [EMAIL PROTECTED]
> > > > > > Subject: load balancing on Rip
> > > > > >
> > > > > >
> > > > > > Hi,
> > > > > > Can anyone tell me how to load balance on rip for
> > > > > > equal and unequal costs.
> > > > > >
> > > > > > Agnelo
> > > > > >
> > > > > > __________________________________________________
> > > > > > Do You Yahoo!?
> > > > > > Yahoo! Mail - Free email you can access from anywhere!
> > > > > > http://mail.yahoo.com/
> > > > > >
> > > > > > ___________________________________
> > > > > > UPDATED Posting Guidelines:
>http://www.groupstudy.com/list/guide.html
> > > > > > FAQ, list archives, and subscription info:
>http://www.groupstudy.com
> > > > > > Report misconduct and Nondisclosure violations to
>[EMAIL PROTECTED]
> > > > > >
> > > > > > ___________________________________
> > > > > > UPDATED Posting Guidelines:
>http://www.groupstudy.com/list/guide.html
> > > > > > FAQ, list archives, and subscription info:
>http://www.groupstudy.com
> > > > > > Report misconduct and Nondisclosure violations to
>[EMAIL PROTECTED]
> > > > >
> > > > > ___________________________________
> > > > > UPDATED Posting Guidelines:
>http://www.groupstudy.com/list/guide.html
> > > > > FAQ, list archives, and subscription info:
>http://www.groupstudy.com
> > > > > Report misconduct and Nondisclosure violations to
>[EMAIL PROTECTED]
> > > > >
> > > >
> > > > -----------------------------------------------
> > > > Brian Feeny, CCNA, CCDA [EMAIL PROTECTED]
> > > > Network Administrator
> > > > ShreveNet Inc. (ASN 11881)
> > >
> >
> > -----------------------------------------------
> > Brian Feeny, CCNA, CCDA [EMAIL PROTECTED]
> > Network Administrator
> > ShreveNet Inc. (ASN 11881)
>
>___________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
