Well as usual I don't answer more than the question requires. :-) I guess
I implicitly rely on others to go into more depth, but I may change this
configurable attribute in the future. hehehe
Jim
-----Original Message-----
From: Paree-huff, Andre [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 29, 2000 8:45 AM
To: Croyle, James; 'Suresh Uniyal'; Cisco (E-mail)
Subject: RE: 5-4-3 Rule
This rule is really no longer accurate. To truly find out if your network
is within spec, you need to figure the round trip bit delay per segment and
device.
the 5-4-3 rule is about like the 80/20 rule great for the old days but not
for today.
Andre' Paree-Huff
A+,�ASE/LAN, CCNP,
MCSE+I, Net+, I-Net+
�
Compaq Computer Corp.
NACSC/NSU
V: 317-598-9928
F: 317-598-9949
�
-----Original Message-----
From: Croyle, James [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 29, 2000 5:48 AM
To: 'Suresh Uniyal'; Cisco (E-mail)
Subject: RE: 5-4-3 Rule
There is a basic rule of thumb to follow with 10 Mbps Ethernet networks. It
is commonly known as the 5-4-3 rule and represents the following Ethernet
limitations :
5 4 3
Maximum 5 Segments 4 Repeaters 3 Populated Segments
Jim C avec CC alphabet soup. =)
-----Original Message-----
From: Suresh Uniyal [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 29, 2000 6:59 AM
To: Cisco (E-mail)
Subject: 5-4-3 Rule
Hi all,
What is 5-4-3 rule?
-SU
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
