The first thing I would double check is the configuration of the PC's....
Is the default gateway correct? Is the Mask correct?? Is the IP address
correct??? If you can ping each router interface from either router console
then routing is OK......But because you can't reach a PC behind the
interface, it would lead me to believe it was a PC problem.
--
Chris A.
Muhammad Faheem <[EMAIL PROTECTED]> wrote in message
F10CA2BAB231D211979A00805FC7A31A017A1FD8@AFCOMP02">news:F10CA2BAB231D211979A00805FC7A31A017A1FD8@AFCOMP02...
> Hi All
>
> I am trying to configure 2 Cisco 801 routers but badly stuck in some basic
> problems pls advice me,
>
> The problem is from Router 1 OR Router2 using Hyperterminal i can ping the
> BRI and E0 ports of each other but i am not able to ping any other PC in
the
> network of Router1 OR Router2 from Router console (Hyperterminal)
>
> Attaching the configuration of both the routers pls advice.
>
> Thanx.
>
>
>
> <<Route1.txt>> <<Router2.txt>>
>
>
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
