Actually, The "frame-relay traffic-rate" command DOES exist. It is used as
a simpler alternative to using the three commands for setting up traffic
shaping on Frame Relay ("frame-relay cir out", "frame-relay be out", and
"frame-relay bc out").
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/wan_r/wrfrelay.htm#6354
frame-relay traffic-rate average [peak]
average = average rate in bits per second; equivalent to specifying the
contracted CIR
peak = (Optional) Peak rate, in bits per second; equivalent to CIR + Be/Tc
= CIR (1 + Be/Bc) = CIR + EIR.
the configured peak and average rates are converted to the equivalent CIR,
excess burst size (Be), and committed burst size (Bc) values
Karen E Young
Network Engineer
ELF Technologies, Inc
[EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
