After is this ok? The first line should read:
myrout (config) # access-list 1 permit 172.16.1.3
My keyboard keys are too close
together.....................................................
""Daniel Boutet"" <[EMAIL PROTECTED]> wrote in message
8ojup5$sum$[EMAIL PROTECTED]">news:8ojup5$sum$[EMAIL PROTECTED]...
> I am aware that access lists have a deny all implicitly applied at the
end.
> I am also aware that if you enable an access list for http access to the
> switch there is also an implicit deny all at the end. But my question is
> does this also apply to terminal access list?
>
> I would also like to know the proper syntax to apply this list at the
line.
> Is this ok?
> myrout (config)# access-class 1 permit 1 172.16.1.3
> myrout (config)# line vty 0 4
> myrout (config-line)# access-class 1 inout
>
> My understanding of the "inout" rather than "in" only is to restrict where
> you can telnet once you are in. By adding the "out" where am I restricting
> 172.16.1.3 ?
> Or is it rather that I am allowing 172.16.1.3 to telnet to other device
once
> I am in the line mode?
>
> A little confused here.
>
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
