>>>>>
I understand that since we are cloning machines over
the network from ( #.#.20.#)subnet to different subnet
where all the workstations are located, this traffic
has to go through a router. We are using Cat 5500.
>>>>>
Run a sniffer on your network for about 30 minutes and isolate the source sending
broadcasts since its likely its a screwy program. This doesnt have anything to do with
cloning and may be that some misconfiguration you may have had in the original design
carried over somehome.
ip verify unicast reverse-path
interface {int}
rate-limit output access-group 153 45000000 100000 100000
conform-action
transmit exceed-action drop
rate-limit output access-group 152 1000000 100000 100000
conform-action
transmit exceed-action drop
Replace: 45000000 with the maximum link bandwidth & 1000000 with a value that is
between 50% and 30% of the SYN flood rate burst normal and burst max rates with
accurate values
______________________________________________
FREE Personalized Email at Mail.com
Sign up at http://www.mail.com/?sr=signup
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
