i had a similar problem with a cat 5500 the problem was a encapsulation
mismatch on a trunk. Correct the mismatch and the messagge go away (but for
me wasn't occasionally but every 5 seconds)
hope this help
Stefano
> -----Original Message-----
> From: alex campbell [mailto:[EMAIL PROTECTED]]
> Sent: gioved� 31 agosto 2000 14.52
> To: [EMAIL PROTECTED]
> Subject: Spanning tree screw up
>
>
> hello ppl
> I have a cat 5500 with 12 ethernet cards and an RSM
> over the weekend I repatched the whole network and added a couple new
> vlans...it all seems to work.
> However
>
> this message seems to come up occasionally
> %MLS-4-RESUMESC:Resume MLS after detecting too many moves
> %MLS-4-MOVEOVERFLOW:Too many moves, stop MLS for 5 sec (2000000)
>
> my telnet connection to the switch seems to disconnect when
> it feels like it
> (which is SO enjoyable when configuring VLANs :))
> on looking through the Cisco Web Site, I understand that its
> a spanning tree
> problem. However, do any of you guys know if rebooting the
> switch would
> solve the problem ? and if not, what will ?
> Thanks
> Alex
>
> ______________________________________________________________
> ___________
> Get Your Private, Free E-mail from MSN Hotmail at
http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
