Gotta Console in via the ROM mode... That's all the IOS you have left.
http://www.cisco.com/warp/public/474/pswdrec_2500.html
These steps are the same as a password recovery (going into ROM). You must
Copy TFTP FLASH from ROM, then reload & make sure your Config-Register is
back in 0x2102...
Good Luck !!!
Phil
----- Original Message -----
From: "Jim Bond" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Wednesday, September 06, 2000 4:52 AM
Subject: 4000 flash erased, help!
> Hello,
>
> I accidentally erased my 4000 router flash and can't
> boot up. It didn't recognize my ethernet port so won't
> boot from net.
>
> How do I recover the IOS?
>
> Thanks in advance.
>
>
> Jim
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Mail - Free email you can access from anywhere!
> http://mail.yahoo.com/
>
> ___________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
