You need a route to the destination and a route back to the source. Does
that answer your question? So, yes, you will probably need (2) static
routes (unless you are also running a dynamic routing protocol).
-Brad Ellis
CCIE#5796
used cisco gear: www.optsys.net
"jeongwoo park" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> HI all.
> In configuring static route between a central site
> router and a branch office router, do we need to
> configure static route on both routers? or either of
> them? or only central site router? or only branch
> office router? and why?
>
> Thanks in adv.
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Mail - Free email you can access from anywhere!
> http://mail.yahoo.com/
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associate-Announcement.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associate-Announcement.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
