RTFM = Read The F#cking Manuals?
LOL
This is a new one to me.
John
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Tuesday, September 12, 2000 8:34 PM
Subject: Re: cisco switches
> In a message dated 9/12/00 10:49:08 PM Eastern Daylight Time,
> [EMAIL PROTECTED] writes:
>
>
> << hi all,
>
> Do all cisco switches run IOS , I know 1900 do , but what about the
others?
>
>
>
> Jason
> >>
>
> Hey, you've asked a lot of beginner level questions in the past couple
months
> that could be answered extremely simply by a simple phrase...."RTFM" ;)
>
> To answer this one though since I just took the test...the 1900/2820 and
> 2900XL series switches use the IOS. I believe the Set based commands start
at
> the 4000 series switches. Set based may actually start at 5000 and up...I
may
> be wrong on that...This could all be done by (once again) "RTFM" ;)
>
> Hope I helped...
>
> Mark Zabludovsky ~ CCNA, CCDA, 1/4-NP
> <A HREF="mailto: [EMAIL PROTECTED]">[EMAIL PROTECTED]</A>
>
> "Destiny is not a matter of chance, it is a matter of choice; it is
not a
> thing to be waited for, it is a thing to be achieved."
>
> ~William Jennings Bryan~
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
