Tim, you're the man! Thanks a ton. I'd buy you a beer if I could. This is definitely the right way to fix the problem... took a whole minute. Cheers everyone for the help, Jeff ""Timothy Mark Jones"" <[EMAIL PROTECTED]> wrote in message 8pm6ip$fql$[EMAIL PROTECTED]">news:8pm6ip$fql$[EMAIL PROTECTED]... > The reason it's in router(boot) mode is because you've erased the "boot > system flash bootflash:" command that's needed to find the boot image. > > Do a "show flash bootflash:" on the MSFC and check for the second image > listed and copy the name down EXACTLY (not the boot image name). > > Enter config mode on the MSFC and enter the following: > > boot system bootflash:.image name from flash > > It should look something like this: boot system > bootflash:c6msfc-js-mz.120-7.XE1.bin > > Do a write mem and then reload the MSFC. > > You should then be able to get your full IOS loaded. > > > > Timothy Mark Jones > Network Engineer > Cisco CCNA, CCNP, CCDA, CCDP > Ficomp, Inc. > > ""Jeff Duchin"" <[EMAIL PROTECTED]> wrote in message > 8pm351$ne2$[EMAIL PROTECTED]">news:8pm351$ne2$[EMAIL PROTECTED]... > > Hello all. Quick question... I cleared my running-config and then > foolishly > > gave my start-up config the boot as well. I can still access the msfc, but > > it shows: > > > > Router(boot)# > > > > I tried to change the hostname and it's still showing this. Also, I tried > to > > go ahead and configure from global ip routing and no dice! I can't > configure > > any routing period. Any clue as to how to fix this? > > > > Cheers, > > Jeff > > > > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > > http://www.groupstudy.com/list/Associates.html > > _________________________________ > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > > FAQ, list archives, and subscription info: http://www.groupstudy.com > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _________________________________ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _________________________________ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
