Jason -
Have you checked the status of DTR (etc) under the show interface seril #
command? If you are in fact getting signel- you want to check to see if the
lmi are communicating. Basically this should happen if the switch and router
are communicating. If they are not - verify you are using the correct lmi
setting onthe interface withthe carrier. If that checks out - a reload is a
good idea. If fundamental changes (to say a dlci) are made many times the
interface does not responce properly unless it is either shut down and
restarted or the router reloaded...
Good Luck,
Felice
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
