This should be no problem. It will depend on hardware and IOS version too.
But, I'd need to see a network drawing to tell you how to do it if you had
the right stuff. Especially if you have firewalls in place.
John
----- Original Message -----
From: Chris C. Burton <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, September 14, 2000 9:29 PM
Subject: Dial on Demand Routing
> I have been charged with making our current network redundant using our
> existing technologies. Our current setup is two corporate offices with a
> full T1 to the internet in each office along with multiple Frame-relay
> connections to remote branch offices and between the two corporate
offices.
> I know it is possible to use DDR to create a redundant link in case one
link
> fails, but is it possible to create a redundant link via IPsec/L2TP over
the
> internet using one of our Internet T1 connections to the other T1 in case
of
> frame-relay link failure, if this is possible is there a good book/website
> or other resource with information on this topic.
>
> Chris
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
