Try a different IOS Flavor
--
-Brad
used cisco hardware: www.opt sys.net
cisco hardware newsgroup: news://news.opt sys.net/cisco.hardware
""Alex Lee"" <[EMAIL PROTECTED]> wrote in message
8q93e0$2mm$[EMAIL PROTECTED]">news:8q93e0$2mm$[EMAIL PROTECTED]...
> Hi Group,
>
> I tried to configure two standby groups-- Group 1 & Group 2 on e0
interface
> of a 2501 router according to the book.
>
> Configured the first standby group without any problem. Got the following
> error message when I tried to configure the second standby group
:-"Standby:
> Interface hardware cannot support multiple groups."
>
> My 2501 has code version 11.2 <12>, system image file
:c2500-j-1.112-12.bin,
> 16MB memory and 8 MB flash.
>
> Same thing happened when I tried on another 2501.
>
> Any suggestion ?
>
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
