Sounds like you're on the right track... corrupted FLASH. Find the image
you want to place in FLASH, go to enable, copy TFTP FLASH (dy default you
will be asked to erase the current FLASH code), cross your fingers after the
IOS down load (waiting for the Check Sum to verify), then change your
config-register back to 0x2102, reload, & reconfig. That should be it...
Phil
PS- if the Check Sum fails, you may have software issue... but, if it all
worked before... you may have hardware issue :-(
----- Original Message -----
From: "Peter Gray" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, September 19, 2000 10:59 PM
Subject: Router Bootup Problem
> I have got a corrupt flash on my router. It goes to ROMMON after starting.
> IP doesn't start and it goes to same mood even if I change config-reg to
> 0x2101 . Its a 2600. See the startup message.
>
> System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
> Copyright (c) 1999 by cisco Systems, Inc.
> TAC:Home:SW:IOS:Specials for info
> C2600 platform with 24576 Kbytes of main memory
>
> device does not contain a valid magic number
> boot: cannot open "flash:"
> boot: cannot determine first file name on device "flash:"
>
> System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
> Copyright (c) 1999 by cisco Systems, Inc.
> TAC:Home:SW:IOS:Specials for info
> C2600 platform with 24576 Kbytes of main memory
>
> device does not contain a valid magic number
> boot: cannot open "flash:"
> boot: cannot determine first file name on device "flash:"
>
> System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
> Copyright (c) 1999 by cisco Systems, Inc.
> TAC:Home:SW:IOS:Specials for info
> C2600 platform with 24576 Kbytes of main memory
>
> rommon 1 >
>
> Any comments!!!!!
>
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
> Share information about yourself, create your own public profile at
> http://profiles.msn.com.
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
