At the first look through your message, it seems like the port 1/1
on�HubB�(the one connected to your port 0/4) is only running half-duplex. I
would check that one first.
�
Hth,
�
Ole



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
�Ole Drews Jensen 
�Systems Network Manager 
�CCNA, MCSE, MCP+I 
�RWR Enterprises, Inc. 
�[EMAIL PROTECTED] 
� http://www.oledrews.com/ccnp 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 

-----Original Message-----
From: Deloso, Elmer G. [mailto:[EMAIL PROTECTED]]
Sent: Thursday, September 21, 2000 8:28 AM
To: '[EMAIL PROTECTED]'
Subject: Monitoring/Troubleshooting Catalysts : what does this SYSLOG outp
ut mean?



Hi, group. 
Just want to know why i'm getting this in my syslog on my 2912 
whose port4 is connected by fiber to a 5500. I do know that there's 
a lot of trafiic coming into this port and once in a while the LED turns 
orange. Please comment on this. Thanks. 

Elmer 

FastEthernet0/4 is up, line protocol is up 
� Hardware is Fast Ethernet, address is 0030.1900.7284 (bia 0030.1900.7284) 
� MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, 
���� reliability 254/255, txload 1/255, rxload 1/255 
� Encapsulation ARPA, loopback not set 
� Keepalive not set 
� Full-duplex, 100Mb/s 
� ARP type: ARPA, ARP Timeout 04:00:00 
� Last input 00:00:02, output 00:00:00, output hang never 
� Last clearing of "show interface" counters never 
� Queueing strategy: fifo 
� Output queue 0/40, 0 drops; input queue 0/75, 0 drops 
� 5 minute input rate 292000 bits/sec, 114 packets/sec 
� 5 minute output rate 629000 bits/sec, 149 packets/sec 
���� 429157271 packets input, 2185991621 bytes 
���� Received 72566224 broadcasts, 562577 runts, 0 giants, 0 throttles 
���� 2317609 input errors, 877616 CRC, 877416 frame, 1391 overrun, 2261
ignored 
���� 0 watchdog, 1251401 multicast 
���� 0 input packets with dribble condition detected 
���� 553912904 packets output, 4116503002 bytes, 0 underruns 
���� 0 output errors, 0 collisions, 1 interface resets 
���� 0 babbles, 0 late collision, 0 deferred 
���� 0 lost carrier, 0 no carrier 
���� 0 output buffer failures, 0 output buffers swapped out 


Syslog logging: enabled (0 messages dropped, 2488 flushes, 0 overruns) 
��� Console logging: level debugging, 252136 messages logged 
��� Monitor logging: level debugging, 0 messages logged 
��� Buffer logging: level debugging, 124840 messages logged 
��� File logging: disabled 
��� Trap logging: level informational, 124845 message lines logged 

Log Buffer (4096 bytes): 
1/1 (half duplex). 
11w4d: %CDP-CLUSTER_MEMBER_3-4-DUPLEX_MISMATCH: duplex mismatch discovered
on FastEthernet0/4 (not half duplex), with 067521768(HubB) 1/1 (half
duplex).

11w4d: %LINK-CLUSTER_MEMBER_3-4-ERROR: FastEthernet0/4 is experiencing
errors 
11w4d: %CDP-CLUSTER_MEMBER_3-4-DUPLEX_MISMATCH: duplex mismatch discovered
on FastEthernet0/4 (not half duplex), with 067521768(HubB) 1/1 (half
duplex).

11w4d: %CDP-CLUSTER_MEMBER_3-4-DUPLEX_MISMATCH: duplex mismatch discovered
on FastEthernet0/4 (not half duplex), with 067521768(HubB) 1/1 (half
duplex).

11w4d: %LINK-CLUSTER_MEMBER_3-4-ERROR: FastEthernet0/4 is experiencing
errors 
11w4d: %CDP-CLUSTER_MEMBER_3-4-DUPLEX_MISMATCH: duplex mismatch discovered
on FastEthernet0/4 (not half duplex), with 067521768(HubB) 1/1 (half
duplex).

11w4d: %LINK-CLUSTER_MEMBER_3-4-ERROR: FastEthernet0/4 is experiencing
errors 

**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to