Thank you, Brian,
That worked!!
But only after I deleted the usernames
from the running-config.
Thanks,
Ray Mosely, CCNA
-----Original Message-----
From: Brian [mailto:[EMAIL PROTECTED]]
Sent: Thursday, September 21, 2000 11:23 AM
To: Ray Mosely
Cc: [EMAIL PROTECTED]
Subject: Re: Catalyst 2900XL Web Management password
On Thu, 21 Sep 2000, Ray Mosely wrote:
>
> I've got a 2900XL that my predecessor set up.
> I went through the Cisco routine for recovering
> from lost passwords, and have good console and
> telnet access to the CLI.
>
> But I can't get into the Web interface. It asks
> for a username and password.
>
> Two questions:
> 1. how can I change the web interface username
> and password from the CLI?
> 2. any primers or tutorials on Catalyst switches
> than anyone can recommend? Quick and dirty,
> and on the Web, just until I can get some
> books ordered.
>
whatever you set as the enable password is what you can use on the web to
get in........just leave username blank. Once in on the web, you can
change username/password there if you like.
> Thanks,
> Ray Mosely, CCNA
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
-----------------------------------------------
Brian Feeny, CCNA, CCDA [EMAIL PROTECTED]
Network Administrator
ShreveNet Inc. (ASN 11881)
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
