A few things came to mind.
First, my telco (Bell South) has been notorious for years about not telling
customers about trailing zeros on spids. (Just something to check.)
Second, are you sure your LDN, dialed number and phone number match etc.??
Third, starting this month there are new phases of 10 digit dialing within
the same area code being required in service area's nationwide. Cincinnatti
and Lexington near me will be adding a new area code and 10 digit dialing in
a few weeks. It won't be long till we all have to dial 10 digits to call
next door. Anyway, your LDN may need the area code or you may need to add
the area code to the dial string.
Rodgers Moore, CCDP, CCNP-Security
""Kari Nurdin"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi All, I need help,
>
> I have a central site and a remote site in a ISDN BRI bridged environment.
> I have over and over verified the configuration and it all looks fine. I
> have a number of installs that are similar configurations and they all
> function(I have compared the configs).
>
> I am not able to connect, the following message echos:
> "02:37:133143986176: %ISDN-4-INVALID_CALLEDNUMBER: Interface BR0, Ignoring
> call, LDN and Called Party Number mismatch
> 02:37:146028888064: %ISDN-4-INVALID_CALLEDNUMBER: Interface BR0, Ignoring
> call, LDN and Called Party Number mismatch
> 02:37:158913789952: %ISDN-4-INVALID_CALLEDNUMBER: Interface BR0, Ignoring
> call, LDN and Called Party Number mismatch
> "
>
> When running the debug dialer command the following message echos:
> "02:35:28: BRI0 DDR: Dialing cause bridge (0xE0E0)
> 02:35:28: BRI0 DDR: Attempting to dial 99655555
> 02:35:141733920768: BRI0: wait for isdn carrier timeout, call id=0x8276
> 02:35:33: BRI0 DDR: Dialing cause bridge (0xE0E0)"
>
> I am researching this problem(looking over all my books), I have spoke to
> the telco and they say all is good, show isdn status shows:
> Georgian_H1#show isdn stat
> Global ISDN Switchtype = basic-ni
> ISDN BRI0 interface
> dsl 0, interface ISDN Switchtype = basic-ni
> Layer 1 Status:
> ACTIVE
> Layer 2 Status:
> TEI = 79, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
> TEI = 80, Ces = 2, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
> TEI 79, ces = 1, state = 8(established)
> spid1 configured, spid1 sent, spid1 NOT valid
> TEI 80, ces = 2, state = 8(established)
> spid2 configured, spid2 sent, spid2 NOT valid
> Layer 3 Status:
> 0 Active Layer 3 Call(s)
> Activated dsl 0 CCBs = 1
> CCB:callid=82A0, sapi=0, ces=1, B-chan=2, calltype=DATA
> The Free Channel Mask: 0x80000001
> Total Allocated ISDN CCBs = 1
> Georgian_H1
>
> I don't want to make this post to long, however, if anyone has any ideas.
> Thanks in advance.
>
> P.S. This problem is a good one for me because I am currently studing for
> the BCRAN.
>
> Kari
> CCNA CCDA
>
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
> Share information about yourself, create your own public profile at
> http://profiles.msn.com.
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
