Shawn,
Looks like you need more bandwidth....take a look at the load on the
interface (224/255). This circuit is pretty much maxed out. I see your BW is
set for 768kb....might look into going all the way with a full T1. Also, you
can try changing your queueing from FIFO to WFQ (weighted-fair queueing),
however, it may not do you much good right now since your pipe is saturated.
HTH,
Chuck
----- Original Message -----
From: "Gressel, Shawn M." <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, September 21, 2000 1:45 PM
Subject: output queue drops
>
> Below is a serial interface on a 7513 we are seeing output queue drops
> I cleared the counters about 5 minutes previous to this output
>
> any ideas on resolving this problem?
>
> MTU 1500 bytes, BW 768 Kbit, DLY 20000 usec, rely 255/255, load 224/255
> Encapsulation HDLC, loopback not set, keepalive set (10 sec)
> Last input 00:00:00, output 00:00:01, output hang never
> Last clearing of "show interface" counters 00:17:33
> Queueing strategy: fifo
> Output queue 0/40, 3820 drops; input queue 0/75, 0 drops
> 5 minute input rate 497000 bits/sec, 374 packets/sec
> 5 minute output rate 676000 bits/sec, 169 packets/sec
> 391198 packets input, 65520174 bytes, 0 no buffer
> Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
> 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
> 165281 packets output, 87180992 bytes, 0 underruns
> 0 output errors, 0 collisions, 0 interface resets
> 0 output buffer failures, 0 output buffers swapped out
> 0 carrier transitions
> RTS up, CTS down, DTR up, DCD up, DSR up
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
