You are trying to solve something that is not a real problem . The message : Last Ring Status 00:32:29 <Soft Error> (0x2000) indicates that the last status was a soft error . Mostlikely because insertion/removal of a station in the ring ( 1/2 hour ago ) . This is not a problem . Are actually see a problem on the ring beside this message ? flem --- Jim Barksdale <[EMAIL PROTECTED]> wrote: > Here is what I found and the site where I found it > > > * The Active Monitor removes circulating > frames from the ring. As > a > frame passes the Active Monitor, a special > bit called a monitor > count bit is set. If the monitor count bit is > set, the Active > Monitor assumes the original sender of the > frame was unable to > remove the frame from the ring. The Active > Monitor purges this > frame, and sends a Token Error Soft Error to > the Ring Error > Monitor. > > > http://www.landfield.com/faqs/LANs/token-ring-faq/ > > Jim > > Leon Bass wrote: > > > I have been trying to track down a solution for > this error, any > > suggestions are appreciated. > > > > I have changed cables. > > And in the process of scheduling to switch > TokenRing cards. > > I have pasted the interface with the erroe as it > appears. > > > > TokenRing0/0 is up, line protocol is up > > Hardware is IBM2222, address is 1110.12ae.1212 > (bia 0180.69ae.1234) > > Internet address is 192.99.29.1/24 > > MTU 4464 bytes, BW 16000 Kbit, DLY 630 usec, > > reliability 255/255, txload 1/255, rxload > 1/255 > > Encapsulation SNAP, loopback not set > > Keepalive set (10 sec) > > ARP type: SNAP, ARP Timeout 04:00:00 > > Ring speed: 16 Mbps > > Duplex: half > > Mode: Classic token ring station > > Group Address: 0x00000000, Functional Address: > 0x08000000 > > Ethernet Transit OUI: 0x000000 > > Last Ring Status 00:32:29 <Soft Error> (0x2000) > > Last input 00:00:00, output 00:00:00, output > hang never > > Last clearing of "show interface" counters never > > Queueing strategy: fifo > > Output queue 0/40, 0 drops; input queue 0/75, 0 > drops > > 5 minute input rate 10000 bits/sec, 11 > packets/sec > > 5 minute output rate 2000 bits/sec, 3 > packets/sec > > 2968655 packets input, 416906220 bytes, 0 no > buffer > > Received 0 broadcasts, 0 runts, 0 giants, 0 > throttles > > 256 input errors, 2 CRC, 0 frame, 0 overrun, > 0 ignored, 0 abort > > --More-- > > > __________________________________________________ Do You Yahoo!? Send instant messages & get email alerts with Yahoo! Messenger. http://im.yahoo.com/ **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _________________________________ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
