Interesting IP addresses you have on the BRI ports. I assume you have fudged
them for security and mis-typed, because I'd be surprised if any router would
accept them. You might want to check that your real addresses are OK.
Having said that, I doubt it's the cause of the problem - the output of the
debugs mentioned by 'clue' could be useful though.
JMcL
---------------------- Forwarded by Jenny Mcleod/NSO/CSDA on 28/09/2000 09:28 am
---------------------------
[EMAIL PROTECTED] (Clue Less) on 27/09/2000 10:51:04 pm
Please respond to [EMAIL PROTECTED] (Clue Less)
To: [EMAIL PROTECTED]
cc: (bcc: JENNY MCLEOD/NSO/CSDA)
Subject: Re: ISDN - I can't ping bri0
Not sure, could you do a 'debug isdn q931' and 'debug ppp neg' to find
out how far it gets?
Clue.
On 26 Sep 2000 21:58:41 -0400, [EMAIL PROTECTED] ("Ron S") wrote:
>Can you please help here ?
>From routerA I try to ping RouterB and ping is unsuccessfull ?
>
>#show dialer displays "Last status:Fail", Last called: 00:00:16
>
>#show isdn status seems OK on both routers;
>State=MULTIPLE_FRAME_ESTABLISHED
>spid1 sent, spid1 valid...
>
>#show int bri0
>bri0 is up, line protocol is up (spoofing)...
>
>
>
>
>
>ROUTERA
>hostname RouterA
>!
>enable password cisco
>username RouterB password 7 03075
>isdn switch-type basic-ni1
>!
>int s0
>no ip add
>!
>int bri0
>ip add 196.1.1.1.1 255.255.255.0
>encap ppp
>isdn spid1 5101 8995101
>isdn spid2 5102 8995102
>dialer idle-timeout 90
>dialer map ip 196.1.1.2 name RouterB broadcast 8995201
>
>dialer load-threshold 1
>dialer-group 1
>no fair-queue
>ppp auth chap
>ppp multilink
>!
>no ip classless
>dialer-list 1 protocol ip permit
>!
>line con 0
>password cisco
>login
>line aux 0
>line vty 0 4
>login
>!
>end
>
>
>ROUTERB
>
>hostname RouterB
>!
>enable password cisco
>username RouterA password 7 03075
>isdn switch-type basic-ni1
>!
>int s0
>no ip add
>!
>int bri0
>ip add 196.1.1.1.2 255.255.255.0
>encap ppp
>isdn spid1 5101 8995201
>isdn spid2 5102 8995202
>dialer idle-timeout 90
>dialer map ip 196.1.1.1 name RouterA
>
>dialer-group 1
>no fair-queue
>ppp auth chap
>ppp multilink
>!
>no ip classless
>dialer-list 1 protocol ip permit
>!
>line con 0
>password cisco
>login
>line aux 0
>line vty 0 4
>login
>!
>end
>
>
>**NOTE: New CCNA/CCDA List has been formed. For more information go to
>http://www.groupstudy.com/list/Associates.html
>_________________________________
>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
>FAQ, list archives, and subscription info: http://www.groupstudy.com
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
