Hi,
If the routers are connected directly, rather than via a hub or other means,
then you'll need a cross over cable.
Hope it works for you.
Neil.
"Henk Botha" <[EMAIL PROTECTED]> wrote in message
news:<8quvin$3lu$[EMAIL PROTECTED]>...
> Hi
>
> My config is OK.
>
> Stupid question do I need a special cable ?
>
>
> Henk
>
> <[EMAIL PROTECTED]> wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> >
> >
> > Some possibilities...
> > Wrong cable? Dud cable? Interface shut down on one or both routers?
> > Non-matching encapsulation? Incorrect IP (or other routed protocol)
> > configuration? Forgot to power up a router :-)?
> > There's a lot of things that could be wrong, so a little more
information
> would
> > be useful.
> > 'no success' means what? Can't ping across the link, or the interface
> doesn't
> > show as up/line protocol up?
> >
> > If you post your configs and 'show int' of the relevant interfaces, we
> might
> > have a little more chance of providing likely solutions, rather than
shots
> in
> > the dark.
> >
> > JMcL
> > ---------------------- Forwarded by Jenny Mcleod/NSO/CSDA on 28/09/2000
> 08:53 am
> > ---------------------------
> >
> >
> > "Henk Botha" <[EMAIL PROTECTED]> on 28/09/2000 02:07:24 am
> >
> > Please respond to "Henk Botha" <[EMAIL PROTECTED]>
> >
> >
> > To: [EMAIL PROTECTED]
> > cc: (bcc: JENNY MCLEOD/NSO/CSDA)
> > Subject: Back to Back
> >
> >
> >
> > Hi
> >
> > I am trying to connect two routers (1601's) back to back for testing. I
> > setup the clock speed on the one, but still have no success
> >
> > What is the correct way of doing it ?
> >
> > Please anybody that can help
> >
> > Henk
> >
> >
> > **NOTE: New CCNA/CCDA List has been formed. For more information go to
> > http://www.groupstudy.com/list/Associates.html
> > _________________________________
> > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
> >
> >
> >
> > **NOTE: New CCNA/CCDA List has been formed. For more information go to
> > http://www.groupstudy.com/list/Associates.html
> > _________________________________
> > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> > FAQ, list archives, and subscription info: http://www.groupstudy.com
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
