1. has somebody used the "set interface" command to assign sc0 an address?
... set interface sc0 [vlan] [ip_addr [netmask [broadcast]]]
2. and if yes, is that address in the same subnet as you?
if not, is the default gateway set on the switch?
... set ip route <destination> <gateway> [metric][primary]
3. and if yes, is it in the same vlan as you? ("your separate vlan")
if not, is there routing between vlans? (RSM, router on a stick...)
Kevin Wigle
CCDP/CCNP
----- Original Message -----
From: "Lakeman, DerrickX" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, 05 October, 2000 19:33
Subject: 5509 switch mgmt
> I'm in a test lab. My partner needs to use the console port to manage the
> 5509 switch. I'd like to manage it also in a separate vlan. Why can't I
even
> ping the switch after I have plugged my network cable into one of the
> ethernet ports?
>
> Thank you,
>
> Dirk Lakeman
> Intel Contractor
> NQL, Microsoft Team
>
>
>
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
