Hello, I just faced a funny problem with a 3640 when I did the xmodem to put
the image, after I finish everything and reture the router back to its
original situation , I tried to modify the register back to 9600 but the
router never accept it. I tried in different ways either by the
config-register or from the RMON to modify the baudrate of the console port
but never worked. The router insist on the 115.2Kbps. I am not sure it is
IOS bug or what? I put 12.05(T) on the router. Did anybody face this before?
Regards,
Anan
-----Original Message-----
From: Brad Ellis [mailto:[EMAIL PROTECTED]]
Sent: Saturday, October 07, 2000 7:20 AM
To: [EMAIL PROTECTED]
Subject: Re: 3620 problem
xmodem download the new code via a console cable. you might want to change
your config-reg to support 115.2kbps (it speeds the process up quite a bit).
send down a small IOS (IP feature set only) and then boot that image and
TFTP the image you actually want on the box. xmodem downloading the code
takes a while, as it downloads it into RAM first, and then writes it to the
flash sector by sector (or something to that extent)
-Brad Ellis
CCIE#5796
[EMAIL PROTECTED]
"Jim Bond" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hello,
>
> I accidently errased 3620 flash, now it boots to
> rommon> everytime. How can I copy back flash?
>
> Thanks in advance.
>
>
> Jim
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Photos - 35mm Quality Prints, Now Get 15 Free!
> http://photos.yahoo.com/
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
