Hmm...well, you don't give us a config or show version so we don't know for sure what the LMI settings are or what the IOS version is. However, by the show interface you provided, it looks as if LMI is to blame.
Newer IOS autosenses the LMI type, but still, I don't trust it. If you have an older IOS or you have a newer IOS that is "autosensing", I would hard code the LMI type. Also, since IOS sets the LMI type to Cisco by default, when/if you hard code it, you might try setting to use ANSI LMI.
Good luck!
Rik Guyler
-----Original Message-----
From: Hans Stout [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, October 10, 2000 2:25 PM
To: [EMAIL PROTECTED]
Subject: Frame Relay problem
Hi colleagues,
I have a problem with my frame relay connection; the serial interface is
up/down, and when I debug the serial interface, I can see that the interface
is constantly trying to restart:23w5d:
Serial5/0: attempting to restart:
--More--
23w5d: Serial5/0(out): StEnq, myseq 4, yourseen 0, DTE down
--More--
23w5d: Serial5/0(out): StEnq, myseq 5, yourseen 0, DTE down
What could be the reason for this ? I'll add the output for the sh int:
Serial5/0 is up, line protocol is down
Hardware is M4T
MTU 1500 bytes, BW 2048 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation FRAME-RELAY, crc 16, loopback not set
Keepalive set (10 sec)
LMI enq sent 240, LMI stat recvd 0, LMI upd recvd 0, DTE LMI down
LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0
LMI DLCI 1023 LMI type is CISCO frame relay DTE
FR SVC disabled, LAPF state down
Broadcast queue 0/64, broadcasts sent/dropped 0/0, interface broadcasts 0
Last input 05:47:09, output 00:00:02, output hang never
Last clearing of "show interface" counters 00:39:54
Queueing strategy: fifo
Output queue 0/40, 0 drops; input queue 0/75, 0 drops
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
354 packets output, 4649 bytes, 0 underruns
0 output errors, 0 collisions, 80 interface resets
0 output buffer failures, 0 output buffers swapped out
80 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=u
Thanks for your help in advance.
Georg
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
