On Tue, 10 Oct 2000, Ya Wen wrote:
> Hi, is there anybody who is using a Cisco 3620 router with 64MB to
> handle BGP4 with full Internet routing table? I am currently multihoming
> to two ISPs using two Cisco 3620s and planning to run BGP4 with them.
that should work.........64MB is getting tight though. Don't try to run
CEF or soft-in.
> But the maximum DRAM a 3620 can handle is 64MB. There is no way I could
> upgrade it to be 128MB unless I change to two bigger boxes. But before I
> do that, I just want to check and see if 64MB is sufficient of handling
> all the Internet routing table.
will probably just be tight but workable. The good news is all your
modules and config will plug nicely into a 3640/3660.
Brian
>
> Thanks very much!
>
> -Ya
>
> **NOTE: New CCNA/CCDA List has been formed. For more information go to
> http://www.groupstudy.com/list/Associates.html
> _________________________________
> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
> FAQ, list archives, and subscription info: http://www.groupstudy.com
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
-----------------------------------------------
Brian Feeny, CCNP, CCDP [EMAIL PROTECTED]
Network Administrator
ShreveNet Inc. (ASN 11881)
**NOTE: New CCNA/CCDA List has been formed. For more information go to
http://www.groupstudy.com/list/Associates.html
_________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
