I've never heard of a 6503 on 6505 and 6509?
-----Original Message-----
From: Taylor, Don [mailto:[EMAIL PROTECTED]]
Sent: Thursday, October 12, 2000 2:43 PM
To: 'p s'; [EMAIL PROTECTED]
Subject: RE: Cisco Pix Telnet Access
Is this the only issue? Are you routing properly between VLANs? Can you ping
the PIX? If telnet from VLAN2 is the only thing blocked, it sounds like a
rule issue.
-----Original Message-----
From: p s [ mailto:[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> ]
Sent: Thursday, October 12, 2000 11:18 AM
To: [EMAIL PROTECTED]
Subject: Cisco Pix Telnet Access
To Cisco Study Group
I have a Cisco 515 Pix Firewall that I cannot Telnet
to from my 10.10.9.0 network. I just created VLAN 2
on my Cisco 6503 Switch, VLAN 2 contains the entire
10.10.9.0 network. VLAN1 contains the 10.10.10.0
network. My 6503 switch connects through an MSFC
interface to a T1 which connects to our Data Center
where the Pix Firewall is located. Does anyone have
any ideas on what would cause this Telnet issue?
Thanks for your help
Paul Stapleton
[EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Get Yahoo! Mail - Free email you can access from anywhere!
http://mail.yahoo.com/ <http://mail.yahoo.com/>
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
<http://www.groupstudy.com/list/cisco.html>
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
