RE: AS5800 / PRI Issue

[Adam Hickey]

Title: RE: AS5800 / PRI Issue

Thanks for the reply.

 

Yes, this is a great idea. However, we have tried this. While speaking to the telco, we verified everyone using primary-dms100.

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Richie, Nathan
Sent: Monday, October 16, 2000 8:59 AM
To: [EMAIL PROTECTED]
Subject: RE: AS5800 / PRI Issue

I would check the switch type with the provider, as this has happened to me before.  I would try different switch types as well, because I have noticed most technicians only know the closest swtich type, which may not be the switch you are attached to.

-----Original Message-----
From: Adam Hickey [mailto:[EMAIL PROTECTED]]
Sent: Monday, October 16, 2000 10:53 AM
To: [EMAIL PROTECTED]
Subject: AS5800 / PRI Issue

Wierd little issue I ran into while turning up a set of PRI's.

While doing "sh isdn stat", numerous d-channels were showing up having both
TEI_ASSIGNED and MULTIPLE_FRAMES_ESTABLISHED attributes. I mean that there
were, literally, two lines saying two different states for a single
d-channel.

Has anyone ran into this before?
Has anyone figured out a cause? Solution?

I can't find anything on TAC.

Thanks
Adam Hickey
CCNA MCP
Network Engineer
Cable & Wireless
[EMAIL PROTECTED]

_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]