Hans,
Token Ring will not work with a cross-over type of cable. You need a MAU
and the proper cables.
the PC serial question isn't really a Cisco question now is it....... a
search on the internet should bring that up quickly but it might be
different depending on how old/what model modem you're connecting.
try http://www.connectworld.net/c6.html#pinoutdiagrams
I found the above link at http://www.stonewallcable.com
Kevin Wigle
CCDP/CCNP............
----- Original Message -----
From: "Hans Schimek" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, 16 October, 2000 13:56
Subject: pins for - token ring respectively serial cable
> Hi!
>
>
> i got a cisco 2504 with a token ring port on it.
> this is a db9-connector. i would like to connect
> two 2504 back-to-back.
> can anyone tell me which pins i have to use
> on the db9-connector.(both ends-please ) ..
>
>
> and another question.
> a simple serial cable ( for connecting pc and modem - DB9 to DB9 )
> i would need the pins, too ....
>
>
>
> thanx in advance
>
> hans
>
> =============================
> Hans Schimek
>
> Student
> Fachhochschule St. P�lten f.
> Telekommunikation und Medien
>
> mailto: [EMAIL PROTECTED]
> gsm : +43 699 10605315
> fax : +43 3613 2311 4
> icq : 22308773
> www : www.schimek.net
>
> =============================
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
