Dear all, Thanks for your effort, I can successfully dial in to access server via hyperterminal, but I can't access using RAS dial up networking.. it prompt me for username and password? What is my username in this case ?? I never specified any username in my AS2509 conf file?? (Pls refer below) pls clarify me!! -----Original Message----- From: Serhat Erkan [mailto:[EMAIL PROTECTED]] Sent: Wednesday, October 18, 2000 8:05 PM To: 'Sim, CT (Chee Tong)' Cc: '[EMAIL PROTECTED]' Subject: RE: access server can't access the dial in- pls help :( this is not a RAS problem, it just a modem problem. take its settings to answer at first ring.. its at command is ATS0=1 good luck p.s for easy installation for RAS side use Cisco ConfigMaker. it is free and downloadable at Cisco site. -----Original Message----- From: Sim, CT (Chee Tong) [mailto:[EMAIL PROTECTED]] Sent: Wednesday, October 18, 2000 1:25 PM To: 'ElephantChild'; 'FAISAL ATHAR'; '[EMAIL PROTECTED]'; '[EMAIL PROTECTED]' Subject: access server can't access the dial in- pls help :( Dear all, I have configured a access server as shown below, I attach my modem in Asyn 1 port and I can reverse telnet to it and the phone line got no problem. Besides, I used use a PC (win95) with a modem installed. In win95, I use hyperterminal to connect the PC modem and tested the at command,.. it work, so I used atdt 77777 (my access server phone no) but I only heard the ring ring tone, the access server never accept it but I can see from the word RING RING on the access server's modem at command console. What should I configure to let the access server modem pick up the call ############################################################################ ####### interface Ethernet0 ip address 60.200.166.11 255.255.252.0 no logging event subif-link-status ! interface Async1 ip unnumbered Ethernet0 encapsulation ppp no logging event subif-link-status async dynamic address async mode interactive peer default ip address 60.200.166.15 ! ip classless ip route 0.0.0.0 0.0.0.0 60.200.164.1 permanent ! line con 0 line 1 password abc123 autoselect ppp login modem InOut transport input all stopbits 1 speed 2400 flowcontrol hardware ================================================================== De informatie opgenomen in dit bericht kan vertrouwelijk zijn en is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en de afzender direct te informeren door het bericht te retourneren. ================================================================== The information contained in this message may be confidential and is intended to be exclusively for the addressee. Should you receive this message unintentionally, please do not use the contents herein and notify the sender immediately by return e-mail. ================================================================== _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ================================================================== De informatie opgenomen in dit bericht kan vertrouwelijk zijn en is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en de afzender direct te informeren door het bericht te retourneren. ================================================================== The information contained in this message may be confidential and is intended to be exclusively for the addressee. Should you receive this message unintentionally, please do not use the contents herein and notify the sender immediately by return e-mail. ================================================================== _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
