|
Your
NAT pool is using RFC 1918 addressing, private networks. Packets sourced
from any of the networks 10.0.0.0/8, 172.16.0.0/12, and 192.168.0.0/16 will not
be routed across the Internet...
This
is one of the suspect lines...
ip nat
pool net-10 10.0.0.1 10.0.0.254 netmask 255.0.0.0
The
NAT'ed address pool range would have to come from the 64.22.13x.xxx
network.
Hello all,
I get 99% "Can not find server" error when browse
any website in Win2k and 20% when using Win95, 98, or ME. In
Win2k I have to refresh many time to get the page to load. Also, I
got timeout while download using FTP program in Win9x
and Win2k.
I'm not sure that my NAT configure in router have
problem. I already remove my ACL and just run basic NAT. Still got
problem browsing w/ Win2k and using FTP.
What else should I put in my NAT
config?
Here is my config:
ip nat translation tcp-timeout 360
ip nat
translation udp-timeout 360
ip nat translation finrst-timeout never
ip
nat translation dns-timeout 61
ip nat pool net-10 10.0.0.1 10.0.0.254
netmask 255.0.0.0
ip nat inside source list 2 interface Ethernet1
overload
no ip finger
no ip domain-lookup
ip domain-name
XXXX.COM
ip name-server 207.211.58.XX
ip inspect dns-timeout 30
ip
inspect tcp finwait-time 20
process-max-time 200
!
interface
Ethernet0
description Connected to Local Network (LAN)
ip
address 10.0.0.1 255.0.0.0
ip nat inside
arp timeout
360
!
interface Ethernet1
description Connected to Internet
-
ip address 64.22.13x.xxx
255.255.XXX.XXX
ip nat outside
arp timeout 360
!
ip
default-gateway 64.22.13X.XXX
ip classless
ip route 0.0.0.0 0.0.0.0
Ethernet1
!
access-list 2 permit 10.0.0.0 0.0.0.255
!
line con
0
transport input none
line aux 0
line vty 0
4
| 
