Hi
If you look at the "bank" coloum you will note there is a "1" and "2"
listed, i.e. the chips are living in banks 1 and 2, therefore 2 flash simms.
If there were only one simm the output would look like this...
switch#sh flash c
8192K bytes of processor board System flash (Read/Write)
Chip Bank Code Size Name
1 1 89A0 2048KB INTEL 28F016SA
2 1 89A0 2048KB INTEL 28F016SA
3 1 89A0 2048KB INTEL 28F016SA
4 1 89A0 2048KB INTEL 28F016SA
HTH
--
John Hardman, CCNP MCSE+I
""Chuck Larrieu"" <[EMAIL PROTECTED]> wrote in message
00cc01c04674$860b1dc0$[EMAIL PROTECTED]">news:00cc01c04674$860b1dc0$[EMAIL PROTECTED]...
> So, Sasa, what can you tell me from this output? :->
>
> Chuck
>
> Router#sh flash chips
> 16384K bytes of processor board System flash (Read ONLY)
>
> Chip Bank Code Size Name
> 1 1 01AD 2048KB AMD 29F016
> 2 1 01AD 2048KB AMD 29F016
> 3 1 01AD 2048KB AMD 29F016
> 4 1 01AD 2048KB AMD 29F016
> 1 2 01AD 2048KB AMD 29F016
> 2 2 01AD 2048KB AMD 29F016
> 3 2 01AD 2048KB AMD 29F016
> 4 2 01AD 2048KB AMD 29F016
> Executing current image from System flash
> Router#
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Sasa
> Milic
> Sent: Saturday, November 04, 2000 5:54 AM
> To: Brian
> Cc: [EMAIL PROTECTED]
> Subject: Re: Cisco memory
>
> Brian wrote:
> >
> > Lets say you have a router with 8MB flash in it. 2 slots for flash
(like
> > a 2500 series). Does anyone know of a way to see if its got 4MB in each
> > slot or just one 8MB chip in one slot without actually opening it up? I
> > don't think this is possible, but would save me some time if it can be
> > done.
>
> Hi Brian,
>
> check output from 'show flash chips' - look for column 'Bank'.
>
> Sasa, CCNP
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
