we have a T1 coming into Corp for our connection to the Internet and have been given a Class C address by the provider ... we want to use Internet legal static ip addresses on all workstations ...i have not set up a PIX before and was hoping the list members would guide me here ... is this ip configurations below correct? 10.1 - serial interface on router 20.2 - lan interface on router 20.3 - outside interface pix 20.4 - inside interface pix must the default gateway on all machines point to the pix inside interface? In addition, we have another router going to our private email server that we need to get email from which is on a 192.168 network ... on the internet router going to the provider and pix i have an all 0s static route defined to serial0 .... should i plug in the router going to the 192.168 network into serial1 and say ip route 192.168.0.0 255.255.0.0 serial1 ????? eigrp is the protocol running on the 192.168 network .... i am researching this today on CCO ... but all help will be appreciated on this. _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
