I had a similar problem last year. The trouble was a result of the demarc
being too far from the router (about 500 feet). I resolved the problem by
removing the "ppp multilink" statement which bound both lines (SPIDs) into
one connection and let them connect separately. Also, add a "dialer
load-threshold 2 either" statement if this solution works for you. That
statement will ensure connection of each line after only 2 bytes (bits?) of
data have transversed the link. This needs to be done on both ends.
Hope this helps,
David Armstrong
""Hans Schimek"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> ISDN calls get disconncted after some time -
> though traffic is flowing - and the interface
> is NOT idle - so it should not be disconncted -
> or is there a timer which disconnects all calls
> after a while ?
>
>
> thanx in advance
>
>
> 00:42:199726942860: ISDN BR1/0: received HOST_DISCONNECT call_id 0x8012
> 00:42:197568495616: ISDN BR1/0: Event: Call to <unknown> was hung up.
> 00:42:199726942732: ISDN BR1/0: process_disc_ack(): call id 0x8012, ces 1,
> call
> type DATA
> 00:42:197568495663: %ISDN-6-DISCONNECT: Interface BRI1/0:1 disconnected
> from 20
> 2504, call lasted 120 seconds
> 00:42:199726942540: %LINK-3-UPDOWN: Interface BRI1/0:1, changed state to
> down
> 00:42:199724968501: ISDN BR1/0: received HOST_DISCONNECT_ACK call_id
0x8012
> 00:42:197568495616: ISDN BR1/0: HOST_DISCONNECT_ACK: call type is DATA
> 00:42:47: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI1/0:1,
changed
> stat
> e to down
> 00:42:47: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1,
> chang
> ed state to down
>
>
>
>
>
> =============================
> Hans Schimek
>
> Student
> Fachhochschule St. P�lten f.
> Telekommunikation und Medien
>
> mailto: [EMAIL PROTECTED]
> gsm : +43 699 10605315
> fax : +43 3613 2311 4
> icq : 22308773
> www : www.schimek.net
>
> =============================
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
