There's a Cisco Press book (which the title slips my mind @ the moment), but
it's always best to remember 11.2 started NAT & DES (early IPSec), 11.3
started PAT & a lot of the technical (module) stuff, & 12.0 brought the new
technologies such as voice, full IPSec/ VPN, Dynamic DHCP "out" (& generally
takes up less room than 11.3)...
This is a bit of a thumbnail approach, but the book talks more about the
actual labeling, etc...
Good Luck !!!
Phil
----- Original Message -----
From: "Raul F. Fernandez" <[EMAIL PROTECTED]>
To: "Shaw, Winston Mr." <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Saturday, November 11, 2000 8:56 PM
Subject: Re: IOS differences
> You have probably been here already but I find everything I need on IOS
> differences here.
> http://www.cisco.com/univercd/cc/td/doc/product/software/index.htm
>
> Sincerely, Raul
> ----- Original Message -----
> From: "Shaw, Winston Mr." <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Saturday, November 11, 2000 5:26 PM
> Subject: IOS differences
>
>
> > Does anyone know if there is a there is a source for the major
differences
> > between IOS releases ?
> >
> > For example 11.1 -added this or that functionality
> > 11.2-added support for x etc.
> >
> > The info is scattered all over on Cisco.
> >
> > thanks,
> > Winston.
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
