I'm trying to configure a cisco 633 SDSL DSU for use with an SDSL
connection. I've been given a VCI of 473 and a VPI of 0. I configure
these values on the wan0-0 port. When I go to write the config to nvram,
it complains that the VPI is invalid:
cbos#sho int wan0-0
WAN0-0 ATM Logical Port
PVC (VPI 0, VCI 473) is configured.
ScalaRate set to Auto
AAL 5 UBR Traffic
RFC1483 State: CLOSED
Local MRU: 2048
RFC1483 Tx: 0
RFC1483 Rx: 0
CDP Packets: 0
Number of Spantree Packets: 0
Number of Unknown Packets: 0
IP Port Disabled
cbos#write
#ERROR# Line Number 7: ATM WAN Virtual Connection Parms = 00, 0, 473, 0
VCI value invalid for current VPI count
Error: errors detected during nvram check
cbos#
Anyone have a pointer to docs on this, or know what this error message means?
Thanks
Ben
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
