Jason,
Just to add to your answer... I just read that you can enable ip and ipx
route-cache same interface so that if you have a secondary ip address on an
interface it will cache routes for the same interface thus enabling fast
switching for the same interface. Pretty cool. Found that while studying
for the CID exam.
Cory
-----Original Message-----
From: Yee, Jason [mailto:[EMAIL PROTECTED]]
Sent: Monday, November 13, 2000 9:11 PM
To: 'Tony Russell'; '[EMAIL PROTECTED]'
Subject: RE: IP route cache
if I am not wrong ip route-cache enable fast-switching while no ip
route-cache disables fast-switching and drops to process switching
so that's really a matter of enabling switching types between interfaces
hope this helps
Jason Yee
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Tony Russell
Sent: Wednesday, November 08, 2000 11:04 PM
To: '[EMAIL PROTECTED]'
Subject: IP route cache
Can someone describe why I would want to use the ip route-cache (or no ip
route-cache) command. I've found references on the Cisco site about how to
use it, but not why.
Tony Russell
Network Engineer
IBEAM Broadcasting
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
