The auxiliary port is used for remote access to the router through an asynchronous modem. You have to assign an ip address to the asynchronous interface mapped to the auxiliary port on a router. The auxiliary password is used to set a password for the aux. port . This port is used to connect a modem to a router for remote console connections. The commands are router# config t router(config)#line aux 0 router(config-line)#login router(config-line)#password azhar router(config-line)^z It is important to connect the modem to the router before configuring the modem to verify that communication between them is established. If the cabling is incorrect, the rest of the process will fail. For a complete router-modem connection, consult the following URL http://www.ieng.com/warp/public/76/9.html Regards Azhar Soomro "ALI SHEERAZ" <[EMAIL PROTECTED]> wrote: hello friends, I need to configure router (2501) thru aux port...I need its configuration..can anybdy help me.. ALI SHEERAZ _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ____________________________________________________________________ Get free email and a permanent address at http://www.netaddress.com/?N=1 _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
