They probably changed the config register. It is usually 0x2102. Here is a
basic breakdown of the values -
Bit No. Hex Meaning
00-03 0000 - 000F Boot Field
0000 Stay at bootstrap prompt
0001 Boot system image on EPROM
0002 - 000F Specify default netboot filename -
cisco<n>-processor_name - where 2<n<15
5 - ?? 20 - ?? Line speed = 19200 ??????????
6 0040 Ignore NVM Contents
7 0080 OEM bit enabled
8 0100 If set (default) a Break command forces system
into bootstrap monitor mode
9 0200 Use secondary bootstrap
10 0400 If cleared (default) all 1's equals broadcast,
if set all 0's are used for broadcasts
11-12 0800 - 1800 Console Line Speed - 9600 if not set
0800 4800
1000 1200
1800 2400
13 2000 Boot default ROM software if network boot fails
14 4000 If set use the net address with broadcasts,
if cleared use all ones/zeros
15 8000 Enable dignostic messages and ignore
NVM contents
Bit 14 Bit 10 Broadcast Address
Off Off <Ones><Ones>
Off On <Zeros><Zeros>
On On <Net><Zeros>
On Off <Net><Ones>
>
>Someone changed my router's console speed to something else. what can
>be done to fix it back to 9600?
>
>thanks
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
