I upgraded a 3640 to 32 meg of flash using two Kingston KCS-F3600/16 16
meg flash simms.
Upon power up, I get the following error messages, even after loading an
image into flash. The router will not boot off of the internal flash. I
can get it to boot off a PCMCIA card in slot0:, and when I sho flash, I
see the image I tftp'd in, but it just doesn't work on boot. Ideas?
System Bootstrap, Version 11.1(7)AX [kuong (7)AX], EARLY DEPLOYMENT
RELEASE SOFTWARE (fc2)
Copyright (c) 1994-1996 by cisco Systems, Inc.
C3600 processor with 65536 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled
unknown flash device - mandev code = 0xffff
cannot read flash info
getdevnum warning: device "flash" has size of zero
unknown flash device - mandev code = 0xffff
cannot read flash info
getdevnum warning: device "flash" has size of zero
open: read error...requested 0x4 bytes, got 0x0
trouble reading device magic number
boot: cannot open "flash:"
boot: cannot determine first file name on device "flash:"
--
Ben Hockenhull
[EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
