Router-12#sh ru
Building configuration...
I have create six static routes, only three of them would appear in the
routing table. Why
Router-12# sh ru
version 11.2
!
ip classless
ip route 10.0.0.0 255.0.0.0 179.70.32.13
ip route 10.10.11.0 255.255.255.0 179.70.32.13
ip route 170.70.10.0 255.255.255.0 170.70.21.11
ip route 170.70.15.0 255.255.255.0 170.70.21.11
ip route 170.71.15.0 255.255.255.0 170.70.21.11
ip route 188.3.5.0 255.255.255.0 179.70.32.13
!
Router-12#sh ip route
Codes: C - connected, S - static, I - IGRP,
R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF,
IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF
NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF
external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS
level-2, * - candidate default
U - per-user static route, o - ODR
Gateway of last resort is not set
170.70.0.0/24 is subnetted, 4 subnets
C 170.70.32.0 is directly connected, Ethernet0/1
S 170.70.15.0 [1/0] via 170.70.21.11
S 170.70.10.0 [1/0] via 170.70.21.11
C 170.70.21.0 is directly connected, Ethernet0/0
170.71.0.0/24 is subnetted, 1 subnets
S 170.71.15.0 [1/0] via 170.70.21.11
Router-12#
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
